![background image](http://html.mh-extra.com/html/omron/sysmac-c200h-ct001-v1/sysmac-c200h-ct001-v1_operation-manual_742017041.webp)
27
Units. The following example shows calculations E6B-CWZ3C Incremental
Encoder when used with the C200H-CT001-V1. Rotational directions are giv-
en as viewed from the end of the encoder shaft.
Power supply
4.75 to 13.2 VDC, ripple (p-p): 5% max.
Current consumption
50 mA max.
Resolution
500 pulses/revolution
Outputs
Phase A, phase B, phase Z
Output type
Open collector
Output capacity
Applied voltage: 30 VDC max.
Sync. current: 80 mA max.
Residual voltage: 1 V max
Max. frequency
30 kHz
Output phase difference
(between phase A and B)
90
°±
45
°
(1/4T
±
1/8T)
Output fall/rise time
1.0
µ
s max.
CW Rotation
Here, input A is advanced by 1/4T
±
1/8T over input B.
1/4 T
±
1/8 T (90
°±
45
°
)
ON
OFF
ON
OFF
Input A
Input B
T
(360
°
)
Towards CW
CCW Rotation
Here, input A is delayed by 1/4T
±
1/8T over input B.
1/4 T
+
1/8 T (90
°
+
45
°
)
ON
OFF
ON
OFF
Input A
Input B
T
(360
°
)
Towards CCW
Since the output phase difference is 90
°±
45
°
, the minimum phase difference
produced by this encoder is as follows:
90
°
– 45
°
= 45
°
Because the C200H-CT001-V1 requires a minimum phase difference of 4.5 4.5
must be less than 45
°
/360
°
. T must therefore be less than 36 meaning the maxi-
mum frequency, 1/T, would be 27.7 kcps (54 rps for 500 pulses per revolution).
This would be the maximum frequency at which this encoder could be used with
the C200H-CT001-V1. With the C200H-CT002, a minimum phase difference of
3 is required. Computing as above shows a maximum frequency of 41.7 kcps
when using the C200H-CT002 with this encoder.
Note The minimum pulse width must be considered when using input Z to reset
the counter. With the C200H-CT001-V1, the pulse width of input Z must be
0.1 ms or greater, and the return frequency must be 5 kcps or less. With the
Encoder Specifications
Input Selection
Section 3-2
Содержание SYSMAC C200H-CT001-V1
