Omron R7D-BP, Руководство пользователя

Страница: 226 / 328

5-49
5-10 User Parameters
5
Operating Functions
Œ
Set the input format of the pulse inputs sent as commands to the Servo Drive from the position
controller.
Explanation of Setting
Œ
Set the number of encoder pulses to be output from the Servo Drive for each rotation.
Œ
The setting can be made from 1 to 16,384 pulses, but the setting will not be valid if it exceeds 2,500
pulses. (Any setting that exceeds the encoder resolution will be invalid.)
Œ
Even if the dividing rate is changed, there will always be 1 pulse per rotation for phase Z.
Pn42
Command Pulse Mode
Setting range 0 to 3 Unit --- Default setting 1
Power OFF
→
ON
Yes
Position
Setting Command pulse mode Servomotor forward command Servomotor reverse command
0 or 2
90
°
phase difference
(phases A and B)
signal inputs
Line driver: t1
≥
2
µ
s
Open collector: t1
≥
5
µ
s
1
Forward pulse and
reverse pulse inputs
Line driver: t2
≥
1
µ
s
Open collector: t2
≥
2.5
µ
s
3
Feed pulse input and
forward/reverse signal
Line driver: t2
≥
1
µ
s
Open collector: t2
≥
2.5
µ
s
t1 t1 t1 t1
t1 t1 t1 t1
Phase A
Phase B
t2 t2
t2
t2
t2
Low
Low
t2
High
Low
t2 t2
t2 t2 t2 t2
t2
Pn43 Not used. (Do not change setting.)
Pn44
Encoder Dividing Rate Setting
Setting range 1 to 16384 Unit Pulse Default setting 2500
Power OFF
→
ON
Yes
All modes