Omron R7D-BP, Руководство пользователя

Страница: 218 / 328

5-41
5-10 User Parameters
5
Operating Functions
Œ
Set the machine rigidity to one of 16 levels for executing realtime autotuning.
Œ
The greater the machine rigidity, the higher the setting. The higher the setting, the higher the
responsiveness.
Œ
If the setting is changed suddenly by a large amount, the gain will change rapidly, subjecting the
machine to shock. Always start with a small value in the setting, and gradually increase the setting
while monitoring machine operation.
Œ
Set the operating pattern for autotuning.
Explanation of Settings
Œ
Set the allowable operating range for the Servomotor.
Œ
The overrun limit function is disabled if the setting is 0.
Œ
For details, refer to Overrun Limit on page 5-16.
Pn22
Realtime Autotuning Machine Rigidity Selection
Setting range 0 to 15 Unit --- Default setting 2
Power OFF
→
ON
---
All modes
Pn23 Not used. (Do not change setting.)
Pn24 Not used. (Do not change setting.)
Pn25
Autotuning Operation Setting
Setting range 0 to 7 Unit --- Default setting 0
Power OFF
→
ON
---
All modes
Setting Rotation direction Number of rotations
0 CCW
→
CW Two rotations
1 CW
→
CCW
2 CCW
→
CCW
3 CW
→
CW
4 CCW
→
CW One rotation
5 CW
→
CCW
6 CCW
→
CCW
7 CW
→
CW
Pn26
Overrun Limit Setting
Setting range 0 to 1000 Unit
×
0.1 rotation Default setting 10
Power OFF
→
ON
---
Position
Pn27 Not used. (Do not change setting.)
Pn28 Not used. (Do not change setting.)
Pn29 Not used. (Do not change setting.)
Pn2A Not used. (Do not change setting.)