40
3.
Basic use
3.2 Switching between modes (continued)
Switching between the setting mode and the communication setting mode
You can switch between the setting mode and the communication setting mode by sending particular commands.
Refer to "6.Detailed settings for communications (
69)" for details about the commands.
It is not possible to move from the communication setting mode to the setting mode.
■
Switching from the setting mode to the
communication setting mode
Command sent
→
"COMM MODE" displayed
("COMM MODE" is displayed while in communication setting mode)
How to enter the password
• When moving from the measuring mode to the setting mode, you need to enter the password that has been set.
• The default password is "0001".
• You can set a password of 4 numerals between 0000 and 9999. Change the password as necessary. (5.7Change
■
Enter the password (Ex.: enter password "3060")
1
Enter "3060" with the [
][
] keys in the password entry screen.
– Press the [MODE• ] key to move one place to the left.
– If you press the [MODE• ] key on the end at the left, the cursor moves to the right end.
2
The password is verified when you press the [ENTER] key and "OK" is displayed.
After this, the transition to setting mode is automatic.
"NG" is displayed if the password you entered was wrong.
Reenter the password.
Command
Setting
mode
1
2
