60
5.
Other Functions
5.3 Display unit conversion
You can display a value calculated by multiplying the integrated electric energy of each circuit by a specified
coefficient. You can convert the active energy to a monetary figure or volume of CO
2
.
■
Set the conversion rate (Ex.: set to 0.300)
If a measured value is displayed, press and hold the [MODE• ] key and enter your password to switch to the setting
mode.
1
Press the [MODE• ] key to move to the common settings "CMMN" category display screen.
2
From the common setting items, press the [
][
] keys to move to "Conversion rate (MENU 07)".
3
Press the [ENTER] key to enter the setting mode. The third decimal place of the setting value in the main
display flashes.The decimal point cannot be changed.
4
Press the [
][
] keys to change the value to "0.300".
– Press the [MODE• ] key to move one place to the left.
– If you press the [MODE• ] key on the end at the left, the cursor moves to the right end.
5
Press the [ENTER] key to confirm your change.
1
Automatic transition
2
4
5
3
