20
1.
Overview of the unit
1.7 Mode configuration
This model has three modes: measuring mode, setting mode, and communication setting mode.
– Measuring mode: The measured values for each circuit are displayed.
– Setting mode: By operating keys on the body of the unit you can change settings for each of the circuits, and
make common settings for communications, output, the display, etc.
– Communication setting mode: Make settings on the units using RS-485 communication.
• In the measuring mode and setting mode, the circuit B to D items are displayed by switching the enable/disable
settings for each of the circuits to "ON" (enabled). (The circuits indicated inside the dotted lines in the above
diagram are "OFF" (disabled) in the default state.)
• The alarm screen is displayed when an alarm has occurred.
Circuit D
Measurement
value
Circuit C
Measurement
value
Circuit B
Measurement
value
Circuit A
Measurement
value
CircuitA
Setting
value
CircuitB
Setting
value
CircuitC
Setting
value
CircuitD
Setting
value
Other
Setting
value
Common
Setting
value
Start-Up
Measurement mode
Communication
setting mode
Configuration mode
Hold Down
Command
Password input
Alarm
screen
[MODE
・
]
[MODE
・
]
[MODE
・
]
Using RS-485
communication,
change setting from
a host device.