64
5.
Other Functions
5.7 Change password
• This enables you to change the password that you need to enter when moving from the measuring mode to the
setting mode.
• You can set a password of 4 numerals between 0000 and 9999.
• The default password is "0001".
• There is no functionality to disable the password setting.
■
Set the password (Ex.: set to 3060)
If a measured value is displayed, press and hold the [MODE• ] key and enter your password to switch to the setting
mode.
1
Press the [MODE• ] key to move to the common settings "CMMN" category display screen.
2
From the common setting items, press the [
][
] keys to move to "Change password (MENU 0C)".
3
Press the [ENTER] key to enter the setting mode.
4
Press the [
][
] keys to change to "3060".
– Press the [MODE• ] key to move one place to the left.
– If you press the [MODE• ] key on the end at the left, the cursor moves to the right end.
5
"ONCE AGAIN" is displayed when you press the [ENTER] key.
6
The screen to enter the password the second time is displayed.
7
Input the password you entered in
4
(3060) again.
8
"OK" is displayed when you press the [ENTER] key, the display transitions to the "Change password
(MENU 0C)" display, and the password has been changed successfully.
NG is displayed if the password you entered the first time and the
second time are different, and the display returns to "Change password
(MENU 0C)".
Change the password again.
Important
• You will be unable to reset the password if you forget it. Take care to note the password carefully when
changing it.
• If you forget the password, contact the place of purchase or the manufacturer.
1
Automatic transition
2
4
5
3
6
7
8
