Omron K3TS, Руководство по эксплуатации

Страница: 25 / 97

/
6-1 Before Setting the Parameters
6-1-1 Level of Setting Mode and Parameters
The Intelligent Signal Processor is used mainly in two modes: the RUN mode
and the setting mode. In these two modes, the various parameters of the In-
telligent Signal Processor can be set. The setting mode has three levels, in
each of which one or more parameters can be used. To set the parameters,
therefore, first select the setting mode, then select the level and parameter
required, from which the necessary parameters can be set. The following
diagram illustrates how this is done.
Press 1 s
Press 1 s
Press 1 s
Press 1 s
Press 2 s
Press 1 s
RUN mode
Input range
No. of process
values to aver-
age
TIMING-delay
OFF-delay
Baud rate
Protect
Linear output
range
K constant
Prescale value
Hysteresis
Bank 0
set values
Setting level 3
Operating
parameter 1
Display refresh
period
Communications
unit no.
Operating
parameter 2
Operating
parameter 3
Bank 1
set values
Bank 7
set values
Setting level 2 Setting level 1
Setting mode
Setting
parameter
Press 1 s
Display shift
Shift protect
%# $ !
Section 6-1