Omron K3TS, Руководство по эксплуатации

Страница: 27 / 97

6-1-2 Parameter Setting Procedure
First, set operating parameters on setting level 3. Then set an input range on
setting level 2. Some parameters will not be displayed when the parameter is
changed for another one during operation. When a new input range is se-
lected during operation, all parameters on setting levels 1 and 2 are reset to
initial values.
The setting procedure is as follows:
1, 2, 3...
1. Operating parameter 1 (setting level 3)
2. Operating parameter 2 (setting level 3)
3. Operating parameter 3 (setting level 3)
4. Input range (setting level 2)
5. Other parameters
Parameters other than the operating parameters and the input range can be
set in any order.
6-1-3 List of Parameters for Each Model
The following tables indicate which parameters are available for each Model.
Set Value LED Display Models: K3TS-SD B-
Level Parameter Display Output
C2/5,T1/2 B4 L4/5/6 S5/6
1 Bank 0 set values Yes Yes Yes Yes
Bank 1 set values Yes Yes Yes Yes
Bank 2 set values Yes Yes Yes Yes
Bank 3 set values Yes Yes Yes Yes
Bank 4 set values Yes Yes Yes Yes
Bank 5 set values Yes Yes Yes Yes
Bank 6 set values Yes Yes Yes Yes
Bank 7 set values Yes Yes Yes Yes
Hysteresis Yes Yes Yes Yes
Prescale value Yes Yes Yes Yes
Display shift Shift value Yes --- --- ---
Shift protect Yes --- --- ---
K constant Yes Yes Yes Yes
Linear output range --- --- Yes ---
Set value protect Yes Yes Yes Yes
2 Input range Yes Yes Yes Yes
Display refresh period Yes Yes Yes Yes
Process values averaging Yes Yes Yes Yes
TIMING-delay Yes Yes Yes Yes
OFF-delay Yes Yes Yes Yes
Communications unit no. --- --- --- Yes
Baud rate --- --- --- Yes
3 Operating parameter 1 Yes Yes Yes Yes
Operating parameter 2 Yes Yes Yes Yes
Operating parameter 3 Yes Yes Yes Yes
%# $ !
Section 6-1