Omron K3TS, Руководство по эксплуатации

Страница: 14 / 97

*
2-2 K3TS-SD1 D- (with Thumbwheel Switches)
The following diagram identifies the major features found on the K3TS with
Thumbwheel Switches front panel. The table gives a brief description of the
function of each front panel feature.
3. PV display status indicators 2. Comparative output status indicators
1. PV display
5. Unit
6. Operation keys
4. Thumbwheel switches
No. Name Functions
1 PV (process value)
display Displays the process, maximum, and minimum values. Displays characters indicating
the set mode and set values. Displays an error message when an error occurs.
2 Comparative
output status
indicators H Is lit when H comparative output status is ON. H comparative output status turns ON
when the measured value exceeds the H set value.
L Is lit when L comparative output status is ON. L comparative output status turns ON
when the measured value falls below the L set value.
PASS Is lit when PASS comparative output status is ON. PASS comparative output status
turns ON when all HH, H, L, and LL comparative output status are OFF.
3 PV display
status
indicators HOLD Is lit when HOLD input is ON. By turning ON the HOLD terminal on the rear panel, the
hold function can be effected.
TIMING Is lit when the TIMING input is ON. By turning ON the TIMING terminal on the rear
panel, the TIMING hold function can be effected.
Min Indicates that the value displayed on the PV display is the minimum value. To display
the minimum value, use the DATA TEACH Key.
Max Indicates that the value displayed on the PV display is the maximum value. To display
the maximum value, use the DATA TEACH Key.
ZERO Is lit when ZERO shift status is ON. By turning ON the ZERO terminal on the rear
panel, the ZERO shift function can be effected.
4 Thumbwheel switches Set H and L set values. The set values can be changed at any time regardless of the
RUN or setting mode.
5 Unit Attach the appropriate label (use the labels supplied as accessories).
Section 2-2