Omron K3TS, Руководство по эксплуатации

Страница: 80 / 97

%&
8-4 Checking Height Differences
The following operations are possible with the K3TS:
•
Using two displacement sensors, the difference in the level of an object sur-
face can be measured by setting operating parameter to A -- B.
•
With the forced zero function, the difference in the level of an object surface
can be compared with that of a standard object.
Settings
Level 3
(A--B)
(No previous average comparison)
(Sampling hold)
Level 2
(4 to 20 mA)
---
---
Level 1
to (Example: Checks if the objects are within a thickness of 3
(standard thickness)
±
0.1 mm.)
=
=
=
=
(Adjust according to the object)
= ---
If X
2
= 0.00, Y
2
= 0.00
If X
1
= 16.00, Y
1
= 8.00
(Input the results of operation for X and Y.)
(set to if necessary, after all setting operations have been com-
pleted.)
“---” indicates parameters that are not displayed.
This method can be applied to an ordinary dimensional checking operation.
By measuring the distance between the upper surface of the object and the
belt conveyor, the dimension of the object will be measured accurately even
if the belt is not evenly flat.
',$ )$ %%
Section 8-4