Omron K3TS, Руководство по эксплуатации

Страница: 15 / 97

(
No. Functions Name
6 Operation
Keys
Level Key
Selects the setting mode, in which the set levels can be changed. For details on the
set levels, refer to
6-1 Before Setting the Parameters.
Display
Key
Setting
status 1 Setting
status 2
Parameter
display
This key has no function in RUN mode. In the setting mode, after a parameter
is selected with the Shift Key, the selected setting is enabled or disabled or the
set value is written to memory with this key.
Shift Key
Shifts the digit where the set value is to be changed.
Selects a parameter at each setting level.
For details on the setting parameter, refer to
Section 6 Parameter Setting and
Operation.
Parameter 1 Parameter 2 Parameter n
Up Key
Increases the value of the current digit in the set value by one.
DATA
TEACH
Key
Displays the process, maximum, or minimum value. (Operating parameter 3:
Only in the normal setting.)
In the setting mode, effects the teaching function. With this function, the set
values, prescale values and linear output range are set by means of actual
input. For details on the teaching function, refer to
6-3-2 Special Functions.
Process
value Minimum
value Maximum
value
Section 2-2