Omron Face Plate Auto-Builder for NS 3.1, Руководство по эксплуатации

Страница: 66 / 143

51
Three-position ON/OFF (Block Model 002) Section 6-4
The following screen is a Tuning Screen for 2-position ON/OFF built using the
Face Plate Auto-Builder for NS in a 640×480 screen resolution.
The display and operation of each object in the face plate is the same as the
version for 800×600 screen resolution.
A setting field for each parameter is not provided, so up to eight characters can
be displayed for the unit character string for 2-position ON/OFF, instead of the
four characters for Basic PID.
6-4 Three-position ON/OFF (Block Model 002)
This section describes only the differences between the 3-position ON/OFF
and Basic PID (Block Model 011). For details on the areas not covered here,
refer to
6-1 Basic PID (Block Model 011) .
6-4-1 Face Plates
The face plates are almost the same as for Basic PID (Block Model 011)
except that the format of MV has three positions.