Omron Face Plate Auto-Builder for NS 3.1, Руководство по эксплуатации

Страница: 139 / 143

124
Segment Program 3 (Block Model 158) Section 6-19
3: Backup Button
This button backs up data during operation. This is performed to back up
changed settings to the flash memory in the Loop Control Board. The backup
during operation function backs up the function blocks in the RAM in the Loop
Control Board to the flash memory in the Loop Control Board.
4: GRF and PRG Buttons
GRF Button: Opens the Step Data Graph Display Screen.
PRG Button: Opens the Step Data Setting Screen.
5: Bank Display Switching Buttons
Up to 5 banks can be displayed on each Bank Data Setting Screen. These
buttons display a different group of 5 banks.
01-05: Displays banks 1 to 5 06-10: Displays banks 6 to 10
11-15: Displays banks 11 to 15 16-20: Displays banks 16 to 20
21-25: Displays banks 21 to 25 26-30: Displays banks 26 to 30
31-35: Displays banks 31 to 35 36-40: Displays banks 36 to 40
41-45: Displays banks 41 to 45 46-50: Displays banks 46 to 50
51-55: Displays banks 51 to 55 56-60: Displays banks 56 to 60
61-65: Displays banks 61 to 65 66-70: Displays banks 66 to 70
71-75: Displays banks 71 to 75 76-80: Displays banks 76 to 80
81-85: Displays banks 81 to 85 86-90: Displays banks 86 to 90
91-95: Displays banks 91 to 95 96-100: Displays banks 96 to 100
6: Bank Data Display and Setting Buttons
These buttons are used to display and set bank data. The P, I, D, MH, and ML
parameters and the set values from 1 to 5 are displayed, and can be set, for
each bank. The set values from 1 to 5 are input as engineering units accord-
ing to scale data set in the destination function blocks.
Note Carefully consider the effects that changes will have on equipment before
writing any settings.