Omron Face Plate Auto-Builder for NS 3.1, Руководство по эксплуатации

Страница: 128 / 143

113
Batch Flowrate Capture (Block Model 014) Section 6-18
The following values are used in communications with the PLC.
The overrun, pre-batch, and flowrate limitation settings are set as follows:
• Storage format: UDINT
• Characters displayed: 5 integer digits and 1 tenths digit
• Units and scaling: Set to ×0.001 during conversion.
Data is written to the write address of each tag ITEM using a Before Writing
Numeral/String macro, as follows:
• Macro for the overrun, pre-batch, and flowrate limitation settings:
$W2047=BCD(GETNUMVAL()/1000);
WRITECMEM([B0/BP/B1],$W2047,1);
RETURN(1);
• Macro for the MV index position:
$W2047=GETNUMVAL();
WRITECMEM([MV_IDX],$W2047,1);
RETURN(1);
2: Realtime Trend Graph
Tag ITEMs Y1 and MV are displayed in graph format. The following table
shows the characteristics of each tag ITEM's line.
The following screen is a Tuning Screen for a Batch Flowrate Capture Block
face plate built using the Face Plate Auto-Builder for NS in a 640
×
480 screen
resolution.
Parameter Values used in PLC device/
communications
Overrun setting 0 to 9999 (Display ÷ Value of PR)
Pre-batch setting 0 to 9999 (Display ÷ Value of PR)
Flowrate limitation 0 to 9999 (Display ÷ Value of PR)
MV index position Percent data
Tag ITEM Color Minimum
value
Maximum
value
Line
style
Markers Step
display
Y1 (016) Green
−
1500 11500 Solid None Not used.
MV (089) Blue (Color
code 229)
−
1500 11500 Solid None Not used.