Omron Face Plate Auto-Builder for NS 3.1, Руководство по эксплуатации

Страница: 115 / 143

100
Motor Opening Manipulator (Block Model 224) Section 6-16
2: Status Display 2
Displays alarms for out-of-range motor opening input values. The values of
tag ITEMs H and L determine which status character string is displayed.
This button is created as an ON/OFF Button using a Select Shape of type 3 to
switch the graphic displaying the NR, H, or L characters. Control Flag input is
disabled.
3: CT Input Display
A Numeral Display and Input object is used to display the value of tag ITEM
X1 (ITEM 032) in engineering units. Control Flag input is disabled.
4: FIELD Selection Display
A Bit Lamp indicates the control site and the lamp is red when control is onsite
(in the field).
The label displays “FIELD” in the rough font.
5: Open Output Display
A lamp indicates the status of the open manipulation output and the lamp is
red when the output is ON.
The bit lamp is set as a round single-line lamp with the following display col-
ors.
The label displays “HI” in the rough font.
6: Stopped Output Display
A lamp indicates when both the close manipulation output and open manipu-
lation output are OFF. The lamp is red when both outputs are OFF.
The bit lamp is set as a round single-line lamp with the following display col-
ors.
A Select Shape graphic is used for the Button face display.
Display H: Opening input high alarm
output (036)
L: Opening input low alarm
output (037)
NR 0 0
L 0 1
H 1 0
H 1 1
Display color S4: Control Site Input (085)
Yellow 0
Red 1
Display color U1: Open manipulation
output (021)
Green 0
Red 1
Display color U1: Open manipulation
output (021)
U2: Close manipulation output
(022)
Red 0 0
Green 0 1
Green 1 0
Green 1 1