Omron Face Plate Auto-Builder for NS 3.1, Руководство по эксплуатации

Страница: 15 / 143

xvi
Intended Audience 1
1 Intended Audience
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent) and
instrumentation systems.
• Personnel in charge of installing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of managing FA systems and facilities.
2 General Precautions
The user must operate the product according to the performance specifica-
tions described in the operation manuals.
Before using the product under conditions which are not described in the
manual or applying the product to nuclear control systems, railroad systems,
aviation systems, vehicles, combustion systems, medical equipment, amuse-
ment machines, safety equipment, petrochemical plants, and other systems,
machines, and equipment that may have a serious influence on lives and
property if used improperly, consult your OMRON representative.
Make sure that the ratings and performance characteristics of the product are
sufficient for the systems, machines, and equipment, and be sure to provide
the systems, machines, and equipment with double safety mechanisms.
This manual provides information for using the Face Plate Auto-Builder for
NS. Be sure to read this manual before attempting to use the Face Plate Auto-
Builder for NS and keep this manual close at hand for reference during opera-
tion.
!WARNING
It is extremely important that a PLC and all PLC Units/Boards be used for the
specified purpose and under the specified conditions, especially in applica-
tions that can directly or indirectly affect human life. Your must consult with
your OMRON representative before applying a PLC System to the above-
mentioned applications.
3 Safety Precautions
!Caution
When updating the CSV tag file generated by the CX-Process Tool Software
to use with the Face Plate Auto-Builder for NS, be sure to confirm that the
data is consistent with the program in the Loop Control Board/Unit. If the out-
put project is not confirmed, unexpected operation may result.
4 Application Precautions
Observe the following points when using the Face Plate Auto-Builder for NS.
!Caution
Confirm operation of any user programs that you develop before running the
programs.
!Caution Confirm the operation of screen data and host programs before using the pro-
grams for actual applications.