Omron Face Plate Auto-Builder for NS 3.1, Руководство по эксплуатации

Страница: 109 / 143

94
Reversible Motor Manipulator (Block Model 223) Section 6-15
6-15-1 Face Plates
This block operates and monitors a reversible motor. Overcurrents can be
monitored using an input from a CT and operating errors can be monitored
using an answer input.
1: FWD Operation Button
This manipulation command button manually drives the motor in the forward
direction and is enabled only when manual mode is selected.
This button is created as a momentary ON/OFF Button using a Simple Rect-
angle (Type 3) and the display color is determined according to the following
table.
The label displays “FWD” in the rough font.
By setting the following Touch OFF Timing macro, the forward rotation com-
mand is sent when touched. When the button is touched, tag ITEM S1 is ref-
erenced and if S1 = 1, the message “Could not set.” will be displayed and the
setting will not be accepted.
Likewise, if tag ITEM S7 = 1, the message “Could not set.” will be displayed
and the setting will not be accepted.
When the forward rotation command is actually sent, tag ITEM S6 is turned
OFF and then tag ITEM S4 is turned ON.
READCMEM($B32760,[S1],1);
Display color S1: A/M Switch Input (086) S4: MAN-FWD (014)
Yellow 0 0
Red 0 1
Yellow 1 0
Yellow 1 1
1
6
2
3
5
4