32
Enterprise Manager 2100 User’s Guide
14413-200 Rev. A
3.4 Sliding Rail Kit for Rack Mounting
Figure 3-6. Adjusting and Attaching the Track to the Rack Posts
Attach the Track to the Rack Posts
Attach the track to the rack post as follows:
1. Position the track so that the L-clamps are on the outer faces of the front an rear rack
posts. Temporarily tape (or have someone hold) the track in position.
2. Place an L-clamp [2] on the
inner
face of the front rack post.
3. Secure the front L-bracket to the L-clamp with two 8mm M5 screws [3], using only the
top and bottom holes at the U-location. Torque each screw to 4.5 ft-lb (6 N∙m).
4. Repeat Step 2 for the L-clamp at the rear rack post [3].
5. Repeat Step 1 through Step 4 for the remaining track.
6. Check that both slides operate smoothly and do not bind and that the tracks are level
and straight.
Содержание Enterprise Manager 2100
Страница 1: ...I631 E 01 Enterprise Manager 2100 User s Guide...
Страница 36: ......
Страница 60: ......
Страница 82: ......