Omron Enterprise Manager 2100, Руководство пользователя

Страница: 39 / 96

Chapter 4: Connectors and Indicators
Callout Description
5 IEC 60320 C14 Power Input connector
6 Mains power switch. Keep this set to on (I) and use the front power switch to control
power.
4.3 Enterprise Manager 2100 Status Display Panel
The Enterprise Manager 2100 includes an LCD status display panel that provides the inform-
ation shown in Table 4-3.
Table 4-3. Enterprise Manager 2100 Status Display Messages
Message Description
OMRON ADEPT
TECHNOLOGIES Standard splash message during power on.
EM2100 STARTING Boot message after power on.
MODE: Fleet Manager
LINK:
↑↓↓↑
The operating mode of this appliance.
Indicates which Ethernet ports are in use (connected and
active). An up arrow (
↑
) indicates that the port is in use, a
down arrow (
↓
) indicates that the port is not in use.
ETH2: <###.###.###.###>
ETH1: <###.###.###.###>
IPv4 address for the Fleet Ethernet port.
IPv4 address for the Management Ethernet port.
ASYNC: < mode >
STATUS: < status >
Whether the EM2100 is a Primary or Secondary appliance
in an Autosync pair.
The status of an Autosync pair: Disabled , Startup , Active ,
or Failed . See the description below,
UP: < time > Time elapsed since the last reboot.
Autosync Status
The status of an Autosync pair, which can be:
l
Disabled —The current appliance is Primary, but the Secondary IP Address is 0.0.0.0.
Autosync is disabled without a valid Secondary appliance IP Address.
l
Startup —Autosync is configured, but the two appliances have not yet communicated
successfully.
l
Active —Primary and Secondary appliances are communicating.
l
Failed —Primary and Secondary appliances are communicating, but the connection is
lost. The Primary appliance automatically attempts to re-establish communication with
the Secondary appliance.
14413-200 Rev. A Enterprise Manager 2100 User’s Guide 39