Omron CX-MOTION - 06-2008, Руководство по эксплуатации

Страница: 59 / 135

40
Editing Data Section 5-1
5-1 Editing Data
This section describes how to edit data only. For details on the MC Unit’s set-
ting contents, Unit parameters, and Servo Parameters, refer to the
CS1W-
MCH71 Motion Control Unit Operation Manual (W419) or CJ1W-MCH71
Motion Control Unit Operation Manual (W435).
Overview of the
Editing Windows
The following table provides an overview of the editing windows.
Editing Data
This section describes the main editing methods.
■
Direct Input
Input data directly.
The allowed setting range is displayed on the left side of the Status Bar, as
shown in the following diagram.
■
Drop-down List
Either click the
▼
button or press the Alt+
i
Keys. Click the desired setting
directly from the drop-down list to select it.
Editing window Overview
Symbol Names and comments can be set for system parameters and
variable addresses. Those names can be used to reference
parameters in the General Watch Window, programs, and
subprograms.
Position Data Position data can be edited. The names edited here can be
used to reference the data in the General Watch Window, pro-
grams and subprograms.
Unit Settings Unit parameters can be edited.
Zone Settings Zone parameters can be edited.
This function can be used in an MC Unit with the unit version
3.0 or later.
Tasks Motion task parameters can be edited.
All of the current motion task parameters are displayed in the
Edit Motion Task Parameters Window.
Settings Axis parameters can be edited.
All of the current axis parameters are displayed in the Edit
Axis Parameters Window.
Servo Settings Parameters in the Servo Driver can be edited.
Motor Settings Motor parameters can be edited.
Programs The motion task’s program can be edited.
Sub Programs The motion task’s subprograms can be edited.
CAM Data Imported CAM table can be edited.