![background image](http://html1.mh-extra.com/html/omron/cpm2c-s100c/cpm2c-s100c_operation-manual_742520056.webp)
34
Specifications
Section 2-1
2-1
Specifications
2-1-1
General Specifications
Note
The above figure for power consumption includes the power consumption of
the Programming Console and Adapter Unit (CIF
@@
).
2-1-2
Characteristics
Item
Specifications
CPM2C-S100C-DRT
CPM2C-S110C-DRT
CPM2C-S100C
CPM2C-S110C
Internal power supply voltage
20.4 to 26.4 VDC (24 VDC
−
15% to 10%)
Communications power supply
voltage
11 to 25 VDC (supplied by communica-
tions connector)
---
Power con-
sumption
Internal power
supply
4 W max. (See note.)
3 W max. (See note.)
Communica-
tions power sup-
ply
30 mA max.
---
Inrush current
25 A max.
Insulation resistance
20 M
Ω
min. (at 500 VDC) between insulated circuits
Dielectric strength
2,300 VAC for 1 min (between insulated circuits)
Noise immunity
Conforms to IEC61000-4-4; 2 kV (power lines)
Vibration resistance
10 to 57 Hz, 0.075-mm double amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
2
in X,
Y, and Z directions for 80 minutes each (Time coefficient; 8 minutes
×
coefficient fac-
tor 10 = total time 80 minutes)
Shock resistance
147 m/s
2
three times each in X, Y, and Z directions
Ambient temperature
Operating: 0 to 55
°
C
Storage: –20 to 75
°
C (except for the battery)
Humidity
10% to 90% (with no condensation)
Atmosphere
Must be free from corrosive gas
Power interrupt time
2 ms min.
Item
Specifications
Control method
Stored program method
I/O control method
Cyclic scan with direct output (Immediate refreshing can be performed with IORF(97).)
Programming language
Ladder diagram
Instruction length
1 step per instruction, 1 to 5 words per instruction
Instructions
Basic instructions:
14
Special instructions: 105 instructions, 185 variations
Execution time
Basic instructions:
0.64
µ
s (LD instruction)
Special instructions: 7.8
µ
s (MOV instruction)
Program capacity
4,096 words
Maximum I/O capacity
362 points
CPU Unit only:
10 points
Expanded system:
+ 96 points (three 32-point Expansion I/O Units)
CompoBus/S:
+ 256 points
Input bits
160 bits: IR 00000 to IR 00915 (Bits not used for input bits can be used for work bits.)
Output bits
160 bits: IR 01000 to IR 01915 (Bits not used for output bits can be used for work bits.)
CompoBus/S input bits
128 bits: IR 02000 to IR 02715 (Bits not used for CompoBus/S input bits can be used for work
bits.)
CompoBus/S output bits
128 bits: IR 03000 to IR 03715 (Bits not used for CompoBus/S output bits can be used for
work bits.)
Work bits
672 bits: IR 02800 to IR 02915, IR 03800 to IR 04915, and IR 20000 to IR 22715
Содержание CPM2C-S100C
