Omron CJ1W-CTL41-E, Инструкции по эксплуатации

Страница: 120 / 133

103
Appendix B
Assigning External Interrupt Tasks to Outputs
The following table shows which External Interrupt Task Numbers are assigned to rising- and falling edges of the
corresponding Output bits in the Unit Output Pattern. Two External Interrupt Tasks are assigned to every Output if
that Output has been enabled to generate interrupts. An output can be enabled to generate interrupts by setting
the corresponding bit in the Output Interrupt Enable Data (refer to section 4-6-1
"Outputs Generating Interrupts" ).
* The assigned External Interrupt Task number is executed at a rising/falling edge of the corresponding Output bit
in the Unit Output Pattern.
Output Assigned External Interrupt
Task Number Interrupt executed at rising/falling edge*
0 Offset Rising
1 Falling
1 2 Rising
3 Falling
2 4 Rising
5 Falling
3 6 Rising
7 Falling
4 8 Rising
9 Falling
5 10 Rising
11 Falling
6 12 Rising
13 Falling
7 14 Rising
15 Falling
8 16 Rising
17 Falling
9 18 Rising
19 Falling
10 20 Rising
21 Falling
11 22 Rising
23 Falling
12 24 Rising
25 Falling
13 26 Rising
27 Falling
14 28 Rising
29 Falling
15 30 Rising
31 Falling