Omron CJ1W-CTL41-E, Инструкции по эксплуатации

Страница: 63 / 133

Output Control
Section 3-5
46
Note The Counter Output Patterns of Counters which are configured to use no (i.e.
zero) Ranges, are ignored in the AND-calculation of the Unit Output Pattern. Like
this, Counters that you do not want to use, do not influence the AND-calculation of
the Unit Output Pattern. If both the Counters are configured to use no Ranges, the
output patterns for both outputs will be all OFF.
3-5-2 Comparison Mode
If the Unit is configured to control the Outputs in Comparison Mode, this Mode can
be applied to Circular Counters or Linear Counters (refer to section Section 3-2-1
Circular Counter and Section 3-2-2 Linear Counter for more information).
Example Comparison Mode with Linear Counter
In this example 7 Comparison Values are specified. On reaching a Comparison
Value an Output can be Set or Reset depending on the crossing direction. If the
Counter Value
0
CV1
Maximum Count Limit
+2,147,483,647
(=7FFFFFFF
H
)
Minimum Count Limit
−
2,147,483,648
(=80000000
H
)
Soft Output 2
Soft Output 3
CV7 CV6 CV5 CV4 CV3 CV2
CV Value CV crossing
1
2
3
4
5
6
7
−
87,000
−
56,000
−
15,000
+18,000
+46,000
+70.000
+108.000
+CV crossing
−
CV crossing
+CV crossing
−
CV crossing
+CV crossing
−
CV crossing
+CV crossing
−
CV crossing
+CV crossing
−
CV crossing
+CV crossing
−
CV crossing
+CV crossing
−
CV crossing
Soft2 Soft3
R
R
=
=
= Set in positive (+) direction
= Set in negative (
−
) direction
Reset in positive (+) direction
Reset in negative (
−
) direction
R
R
R
S
S
S
S R
S
Soft Output 1
Soft Output 0
Soft0 Soft1