Omron CJ1W-CTL41-E, Инструкции по эксплуатации

Страница: 69 / 133

Output Control
Section 3-5
52
Updating Unit Output
Pattern with Preset or Reset
Action Besides by crossing CV’s the Unit Output Pattern can also be updated by a Preset
or a Reset action. To trigger a Preset or Reset action refer to section
Section 3-4
Controlling a Counter and Section 3-6 Reset Signals . Every Preset or Reset
Action will then update the Unit Output Pattern according to the pre-defined Out-
put Set and Output Reset Patterns. You can define an Output to be Set, Reset or
remain Unchanged (similar as on reaching a Comparison Value).
Note In case for a Preset or Reset action for a specific Output both a Set and a Reset
is defined the Reset has priority.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Output Set Pattern
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT1: CNT2:
m+61 m+81
m+62 m+82
m+63 m+83
m+64 m+84 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Output Reset Pattern
= Soft Outputs 0-31
On triggering a Preset or Reset action:
Output Set Pattern: Output Reset Pattern:
0 = No Change
1 = Set Output
0 = No Change
1 = Reset Output
CNT1: CNT2:
m+21 m+41
m+22 m+42
m+23 m+43
m+24 m+44
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0