Omron CJ1W-CTL41-E, Инструкции по эксплуатации

Страница: 38 / 133

Wiring
Section 2-3
21
2-3 Wiring
2-3-1 Connector Pin-layout
The 40-pin connector on the front of the Unit is divided in two rows, each row con-
taining 20-pins as indicated in the figure below. The Counter Inputs of the Unit are
logically grouped together and allocated to the pins of the connector. The following
table lists the allocation of the external signals to the respective pins.
Counter Inputs To the Counter Inputs of the Counter Unit signals can be applied originating from
one of the following driver types:
• RS-422 Line Driver, either directly connected to the connector on the front of
the Unit or through a separate Input Terminal Block, e.g. the OMRON XW2G-
40G7-E or XW2D-40G6.
• 24 Vdc signals from NPN- or PNP Drivers, only through the separate
OMRON XW2G-40G7-E Input Terminal Block.
Pin No. Signal Pin No. Signal
40 Not Connected 39 Not Connected
38 37
Chan
nel
4
36 Z- 35 Z+
34 B- 33 B+
32 A- 31 A+
30 Not Connected 29 Not Connected
28 27
Ch
anne
l 3
26 Z- 25 Z+
24 B- 23 B+
22 A- 21 A+
20 Not Connected 19 Not Connected
18 17
C
hann
el 2
16 Z- 15 Z+
14 B- 13 B+
12 A- 11 A+
10 Not Connected 9 Not Connected
8 7
Chan
nel
1
6 Z- 5 Z+
4 B- 3 B+
2 A- 1 A+
CH1
CH2
CH3
CH4
PIN 2 PIN 1
PIN 40 PIN 39