the sealing ring and lock washer.
Connect the sound emitter:
1. Connect the yellow-red wire of the sound emitter to the controlled output of the
terminal, connect the brown wire to +12 V /(+24 V) vehicle network
2. Perform installation on/under an inclined or horizontal surface of the vehicle cabin
front panel, fixing it with screws (self-tapping screws) or glue
3. At the installation site, when using screws, drill holes as shown in figure:
4. Mount the sound emitter on the prepared surface and fix.
RFID Reader Devices Connection
Terminal supports connection of swipe card reader devices via 1-Wire physical
interface.
The connected reader device must fully simulate the exchange protocol of DS1990A
product.
Timing diagrams must be executed for all officially declared specifications.
Voice communication
Determine the correspondence of the wire colours to the push-to-talk key adapter
contacts, ringing out the wires and adapter contacts with each other using
multimeter. Connect the Omnicomm OKO terminal voice communication set according
to the diagram:
Auxiliary Equipment
Omnicomm OKO video terminal
51