Antennas
Choose the installation site of antennas based on the antenna cable length.
Antennas should be installed inside the vehicle cabin on a flat surface.
Distance from antennas to any metal surface (except for the installation surface)
should be not less than 50 mm.
We recommend installing antennas on the windshield or on the horizontal surface of
the instrument panel in a place providing a good radio pick-up range of the sky.
1. Degrease the installation site surface
2. Remove protective film from the double adhesive tape on the surface of antenna
3. Attach the antenna with the adhesive side to the installation site
4. Fix the antenna while the adhesive is setting
Setting Overview
Omnicomm OKO video terminals may be configured in two ways:
1. In Omnicomm Configurator when the video terminal is connected to a PC
2. In the Remote Configuration Server (RCS) – remotely
Initial video terminal setting shall be carried out in Omnicomm Configurator.
Omnicomm Configurator
1. Connect the video terminal to a PC using a Mini USB - USB cable
2. Install and run Omnicomm Configurator. A window will open:
Setting Overview
Omnicomm OKO video terminal
13