after which will be enabled the second digital output of the terminal. Possible
values: from 0 to 60 seconds.
In the “Authorized keys” section check the box and enter the iButton key numbers,
which application will enable the second digital output. The key number is indicated
in 6-byte format.
For example, for a key you must enter: 000015AF6D2B
“Output activation” – select “enabled” if you want to activate the second discrete
output when the iButton / card authorized key is applied.
“Output cut off delay” – specify the time after disconnecting the iButton / card key
from the readout device, after which the second digital output will be disabled.
Possible values: from 0 to 3600 seconds.
If necessary, enable/disable the sound reminder of the driver’s authorization in the
field “Enable sound reminder” – “Yes”/”No”, respectively.
iButton readout device connection and installation
Determine the correspondence of the wire colours to the reader contacts, ringing out
the wires and reader body contacts with each other using multimeter. Connect the
iButton reader according to the diagram:
iButton reader must be installed on the vehicle front panel or in the service cover on
the vehicle front panel.
At the installation site, drill a hole of Ø9 mm, install the iButton reader device, put on
Auxiliary Equipment
Omnicomm OKO video terminal
50