Omni OMNI-624, Инструкция по установке и настройке

Страница: 86 / 108

OMNI-624/OMNI-624EU Installation and Setup Guide
6-48
QUESTIONS 37–49 SYSTEM REPORT CODES
L1 L2 L3 L4
1
st
digit 2
nd
digit 1
st
digit 2
nd
digit
event “a” event “b”
These questions enable the reporting of the event indicated on the EEPROM map if the value is not “A”
for single-digit events or “AA” for double-digit events. Selections can be 0–9, A–F. Refer to Section 8:
Central Station Reporting Formats for details on Contact ID reporting codes. Use the separate
Programming Form to enter the actual values for each zone.
For each of the following questions, enter the digits as follows (except as noted):
L1 and L2: Enter the first and second digits of the report code for the listed event.
L3 and L4: Enter the first and second digits of the report code for the listed event.
L1 and L2 L3 and L4
Q 37 DURESS AC LOSS
Q 38
KEYPAD
✱
& #
LOW BAT
Q 39* OPEN (L1) CLOSE (L2) N/A
Q 40 KEYPAD 7 & 9 PANIC KEYPAD 1 & 3 PANIC
Q 41 KEY TAMPER CS TEST
Q 42* FALSE ALARM
(exit error - L1, recent close - L2)
FALSE ALARM
(lockout - L3, cancel - L4)
Q 43 BELL/SIREN SUPERVISION
N/A
Q 44* BYPASS
(bypass - L1, bypass restore - L2)
TROUBLE
(fire trouble - L3, zone trouble -L4)
Q 45 DOWNLOAD WALK TEST
Q 46 EVENT LOG 90% FULL EVENT LOG 100% FULL
Q 47* RF SUPERVISION
(supervision - L1, tamper - L2)
RF SUPERVISION
(low battery - L3, trouble restore - L4)
Q 48 ARM DISABLE
(must be “DD” if disable
arming is set in Q 11, L3)
CLOCK SET
Q 49 UP-ABOUT CLOCK FAIL
* These questions have single-digit report code entries for each location. See Programming Form for
details.