manualshive.com logo in svg

Omni OMNI-624, Инструкция по установке и настройке

Поделиться
Скачать
Omni OMNI-624 Скачать руководство пользователя страница 34

OMNI-624/OMNI-624EU Installation and Setup Guide

5-12

COMMAND

KEYSTROKES

DESCRIPTION

Set Auto-arm Time
(LCD Keypad Only)

# 54

Enter Hour, Minutes. This question may require a user code
with the appropriate authority level to set the clock. Submode
1, Questions 29 (partition 1) or 30 (partition 2).

Display Version

# 55

Displays the revision level of the system software.

Test RF Keyfobs

# 56

Mode to test keyfobs for low battery.

Door Strike

# 57

Door strike trigger/relay activation.  All Users.

Change pager number

# 58

Lets the user modify the current pager phone number.
Note: Once the number is changed, pager reports will go to
that number until the number is changed again using the #58
command.

Display/Toggle Chime

#6

The LCD keypad will display current state and provide option
to toggle the current state.  The LED pads will simply toggle
the chime state and beep once to indicate the state has
changed.

Multi-partition
assignment

#7 [Code] [user

no.] [1, 2, or 4]

(4 = enable

paging)

Allows the assignment of user codes to multiple partitions.
User with authority of 1 or 2 is required to enter this mode.
This allows users to be enabled in both partitions (1 and 2)
and also enables the user for paging (4).

Pager/Beeps enable

#8

Toggle state of pager.  Works same as chime. For user
open/close only.

User On-line Download

#9

Starts remote connect sequence with PC downloader.

Quick commands are valid for 10 seconds of no activity, unless otherwise stated.

CHANGE PARTITION: [#] [0]
[#] [0] [CODE] [0], [1], [2], or [9]

OMNI-KP keypads display “EC” (enter code) after pressing #0, then display “CP” (change partition)
after entering the user code.

QUICK ARMING: # 1

If programmed, Quick Arming will be permitted. Quick Arming allows arming the system without
entry of a user code, and reports as user #01.

NOTE:

 

The system must be in Ready mode. A user code is required to disarm the system. Options

include:

[STAY] [#] [1]

Quick Arm the System in the STAY mode

[INSTANT] [#] [1]

Quick Arm the System in the INSTANT mode

[STAY][INSTANT] [#] [1]

Quick Arm the System in the STAY/INSTANT mode

Содержание OMNI-624













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды