48
Troubleshooting
Fault/Problem
Solution/Action
Stimulation intensity cannot be
adjusted and I get a screen similar
to one of these ones below:
The mode on the OML Remote does
not match the selected/available
mode on the stimulator. This is
the case if one of your stimulators
does not have a stimulation mode
that is available on your other
stimulator, the stimulation mode on
the stimulator has been changed
directly on the stimulator or the OML
Remote has been switched off and
back on.
Try the following:
1. Press the Mode button to change
stimulation mode until you find the
stimulation mode you would like to
use.
2. If one of the stimulators does
not have a stimulation mode that is
available on your other stimulator,
speak to your clinician for further
information.
5
