31
Wireless Footswitches (OML LINQ™)
Single Wireless Footswitch with Two ODFS
®
Pace XLs
If two ODFS
®
Pace XLs have been joined to the same OML
Remote, both can be used with a single wireless footswitch. (This
may need some input from your clinician to ensure that triggering
is set up correctly.)
Join a wireless footswitch to one of the ODFS
®
Pace XL.
The ODFS
®
Pace XL with the wireless footswitch joined to it
becomes the ‘primary’ stimulator, the trigger from the wireless
footswitch is forwarded to the ‘secondary’ stimulator.
If unpausing directly on the ODFS
®
Pace XL (i.e. without using the
OML Remote), the ‘primary’ stimulator will need to be unpaused
first.
The ‘secondary’ stimulator will not trigger wirelessly
without the ‘primary’.
When in Airplane Mode on the ODFS
®
Pace XL, wired footswitches
will be needed to replace the joined wireless footswitch. As the
trigger signal cannot be transmitted wirelessly from the ‘primary’
stimulator, both stimulators will need to have a wired footswitch
attached. Both wired footswitches will need to be placed in the
same position as the single wireless footswitch.
3
