29 |
P a g e
Step 2:
Connect to the ZW-REC and log into
the System page using the administrator log
on. At the bottom of the page press the
Update Firmware
button located near the
bottom of the page.
A dialog box will pop up. Click
OK
and the
firmware update page will load. If the page
does not come up automatically after 10
seconds, navigate to the IP address of the
ZW-REC. In firmware update mode
encryption is disabled so the IP address
needs to start with http://.
Step 3:
Press the
Browse
button and select the firmware (b64 file) for the update. Press the
Upgrade
button to update the firmware.
Wait for the update success screen shown in
Figure 27.
Once the firmware is loaded the ZW-REC restarts and is ready to use. User settings including,
IP Address, Encryption, User Name and Password are preserved during the update so no
additional setup is required.
Figure 25. Firmware Upgrade Dialog
Figure 26. Firmware Upload Page
Figure 27. Upload Success Page
