14 |
P a g e
Special Functions
In a large deployment it may be difficult to know which End Device is currently being
configured. Checking the
Identify Mode
1
setting turns on the Blue Wireless Link LED on the
End Device being configured. Once the End Device has been located uncheck
Identify Mode
setting to turn off the LED. Leaving the LED on will quickly drain the battery on battery
powered units and new readings may not be taken by certain devices in identify mode.
The
Clear End Device
button removes the End Device from the ZW-REC data base. This will
remove any Lost devices from the webpage and clear any errors. If the
Clear End Device
button is pressed when there are no error conditions, the End Device will be removed but
immediately rejoin the network when it next transmits.
The
Reset End Device
2
button resets the End Device if it is currently connected to the
network. The End Device will reset itself the next time it sends a reading to the ZW-REC and
re-join the network automatically.
1
Identify Mode not available for UW Series End Devices
2
Reset End Device not available for UW Series End Devices
