22 |
P a g e
Security Page
The Security Page controls logins and
encryption for the ZW-REC. The ZW-REC
ships with encryption off and easy to
remember passwords by default. For secure
applications Encryption and Strong Password
enforcement are available. After making
changes on the Security page reboot the ZW-
REC using the
Reboot ZW Receiver
button at
the bottom of the page.
6.1 Usernames and Passwords
To change the default user name for the
Client or Admin account, type the desired
name in the dialog box. Click on the
Save
button to confirm any changes.
The change a password, click the button
next to the username. In the dialog box,
enter the old password followed by the new
password. Retype the new password for
confirmation. Click the
Submit
button to
submit changes.
By default, any password up to 16 characters
long is allowed by the ZW-REC. If additional security is required check the require Strong
Password box to enable the Strong Password Policy.
Strong Password Requirements
•
Length of at least 8 characters but no more than 16 characters
•
At least 1 uppercase letter (A-Z)
•
At least 1 lowercase letter (a-z)
•
At least 1 numerical digit (0-9)
•
At least 1 special character (any other character not including ;=()[]<>"&)
The password requirements can be viewed by clicking the information icon. If the current
passwords do not meet the password policy, they are automatically reset to the defaults
shown in
Table 3
. Usernames remain the same.
Table 3. Default Strong Passwords
User Level
Password
Client
Omeg15c!
Administrator
Omeg15a!
Reboot the ZW-REC after completing changes to the usernames or passwords. The new credentials are
enforced following the reboot.
Figure 18. Authentication
Figure 19. Change Password Dialog
