21 |
P a g e
5.4 Radio
When the ZW-REC starts up it performs an energy scan to find a clear RF channel. This RF channel is
displayed in the Radio Section. Due to network planning this channel may need to be changed. Select
the desired channel here. If the RF Channel is changed all connected End Devices need to be reset. To
prevent the ZW-REC from re-scanning when it is rebooted uncheck the Enable Energy Scan box. Press
the
Save
button to save any changes. Changes in this section take place immediately.
Note:
It is highly recommended to uncheck the Enable Energy Scan Box after the first boot
up. This allows End Devices to automatically re-connect to the ZW-REC if it is rebooted. If
left checked, End Devices may need to be reset when the ZW-REC is rebooted.
5.5 Measurement Units
This section selects between SI and Imperial units for temperature and pressure. Changes in
this section take place immediately. End Devices with LCDs will reflect the new setting after
they next transmit.
Figure 16. Radio Configuration
Figure 17. Measurement Units
