Omega Excalibur AL-1000-E, Руководство пользователя

Страница: 22 / 40

The Excalibur comes with two pre-programmed transmitters, but as many as four may be used to
operate the system. Each transmitter has its own unique and ever-changing digital “code”, which is
programmed to operate the system by a special “learning” procedure. When adding transmitters to
operate the security system, all previous transmitter codes are deleted, so all transmitters which are to
operate the system must be programmed at the same time. To program transmitters, follow this process:
How to Program Transmitters
Step 3
Press the “arm/lock” button on each remaining transmitter. The system will chirp the siren
once to confirm that each transmitter code was learned. The other three transmitter button's
functions will automatically be assigned when the “arm/lock” button is learned. If a code is
not received within a 10 second period, the learning process will automatically terminate, as
indicated by another siren burst.
Step 2
Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. The siren will
briefly sound, confirming that for the next 10 seconds the system is ready to learn a transmitter
code. To enter a transmitter code, simply press and release the transmitter’s “arm/lock” button
(the button which is designed to arm the system). When the first transmitter code is learned
all existing stored transmitter codes will be erased.
Step 1
Have all transmitters which are to operate the system at hand. Turn the ignition “on”.
Page - 22
Programming a transmitter to the system will activate the
Unauthorized Transmitter Alert warning and the extended Status
Light visual display; for the next 48 hours the siren will sound a brief
series of chirps every time the vehicle’s ignition key is turned on.