![background image](http://html1.mh-extra.com/html/omega/excalibur-al-1000-e/excalibur-al-1000-e_owners-manual_736695017.webp)
Page - 17
chirp indicates that the starter interrupt will engage and the doors will lock when the alarm becomes
fully armed in 30 seconds.
2) One siren chirp, one light flash, & doors lock: The system has armed passively or actively from the
transmitter. The starter interrupt has engaged and the doors have locked. The auxiliary sensor will
become operational 5 seconds later.
3) One siren chirp after the arming chirp previously mentioned: The auxiliary sensor circuit is
bypassed by pressing the “
II
” transmitter button within 3 seconds of pressing the “arm/lock”
transmitter button.
4) One siren chirp, and no light flash, but only at the moment the ignition switch is turned "off": The
system is in Valet Mode, and will not arm actively or passively.
5) Two siren chirps and the parking lights stay on for 30 seconds:
The system has just been disarmed or 2nd channel output has been activated.
6) Two siren chirps and two light flashes: The system has been placed into the Valet Mode.
7) Four siren chirps, four light flashes, and then lights stay on for 30 seconds: The system has just
disarmed and was activated while you were away. The system will have this disarming confirmation
until the ignition switch is turned "on".
8) Siren sounding, changing sounds every 5 seconds, and the parking lights flashing on and off: The
system is in an activated state. This will also relock the doors.
9) A series of siren chirps lasting two seconds after the ignition switch is turned "on": The
Unauthorized Transmitter Alert feature (page 20-21) has been activated.
10) Three siren chirps upon arming the system: The Zone Bypass feature is indicating that the system
is arming, but bypassing a violated protected zone.
11) Three siren chirps while the system is armed: The Prewarning feature has been activated.
Содержание Excalibur AL-1000-E
Страница 1: ...OWNER S MANUAL for AL 1000 E ...
Страница 40: ...COLOR BACK COVER from a separate file ...