Omega Excalibur AL-1000-E, Руководство пользователя

Страница: 23 / 40

Page - 23
How to Program Features
The Excalibur has 25 programmable features, most of which allow the user to customize the system’s
operation (several programmable features are installation-related). “Features Programming Mode” is
the process for changing these features. The vehicle ignition key and the Valet Switch are used to enter
the Programming Mode, then the transmitter is used to change features. Once the system is in
Programming Mode, a 10 second period without programming activity will cause the system to
automatically exit Programming Mode. Features can be selected in any order as desired.
To Enter Programing Mode and Change Features:
Step 4 Within 10 seconds, press and release the Valet Switch the same number of times as the
desired feature’s number.
• The siren will chirp and the Status Light will flash the same number times as the Valet
Switch was pressed to indicate the feature number which may now be programmed..
To Access a Feature:
Step 3
Within 5 seconds, press and release the Valet Switch 5 times.
• The siren will chirp then sound briefly and the Status Light will flash to confirm that the
system is entering Programing Mode.
• Once in Programming Mode, if 10 seconds of no programming activity occurs, the system
will exit Programming Mode. Programming activity is the pressing of the Valet Switch to
select a feature or pressing a transmitter button once a feature is selected.
Step 2
Turn the ignition off.
Step 1 Turn the vehicles’s ignition on.