Omega Excalibur AL-1000-E, Руководство пользователя

Страница: 19 / 40

The Excalibur also has a
3rd channel output
which is similar to the 2nd channel, but with special
operational design differences which make it ideal for use with an optional remote engine starting
module. To operate it, press and hold the transmitter’s “arm/lock” or “disarm/unlock” buttons
together for 1 second. Or, a programmable feature allows the pressing of the “
III
” button only to operate
this output. The 3rd channel output will operate regardless of the ignition switch being "on" or "off",
and there is no audible or visual confirmation. Activating it also puts the system into a mode in which,
if it detects the engine being started, that it will remain armed but ignore the impact sensor so that remote
starting can be accommodated. Connection of the 3rd channel may require extra parts or installation.
Page - 19
Anti-Carjacking Protection
The Excalibur is equipped with three separate Anti-Carjacking protection features, whose operation
may be selectively activated by the ignition, by an open door, or by the transmitter. All three are
programmable, and must be turned on to operate. Once activated, the user has 53 seconds to cancel
the Anti-Carjacking protection process by pressing the Valet Switch once. If Anti-Carjacking is not
cancelled, 53 seconds after being activated the siren will begin to chirp for 7 seconds to alert the user
that the system is about to enter into an alarm condition. The Valet Switch may still be pressed once
during this period to cancel the Anti-Carjacking process.
If the Anti-Carjacking process is not cancelled before the 60 second countdown expires, the
system will enter an alarm condition, sounding the siren and flashing the parking lights. 30 seconds
after this occurs, or should the ignition be turned off in the meantime, the stater interrupt will engage.
Once the system enters the alarm condition, it will not respond to the transmitter, nor will the
system reset automatically after 60 seconds, and it can only be disengaged by:
Step 1 Turning the vehicle’s ignition off.