Omega Excalibur AL-1000-E, Руководство пользователя

Страница: 24 / 40

Page - 24
Step 6
If there are more features to be programmed, within 10 seconds of the previous action press
and release the Valet Switch the number of times as the next desired feature’s number.
• Again the siren will chirp and the Status Light will flash as many times as the Valet Switch
was pressed to indicate the new feature number which is now accessed.
• Use the transmitter as described in
Step 5
to change the feature as needed.
To Access and Change further Features:
Status Light will turn on.
• Pressing the “disarm/unlock” button turns the feature OFF; the siren will chirp twice and
the Status Light will turn off.
To Change a Feature:
Step 5
After accessing the desired feature, within 10 seconds press and release either the transmitter’s
“arm/lock” button or its “disarm/unlock” button.
• Pressing the “arm/lock” button turns the feature ON; the siren will chirp once and the
• Repeat this
Step 6
for each additional feature until all features are programmed.
Step 7
Turn the vehicles’s ignition on or allow 10 seconds to pass without performing any
programming actions.
• The siren will sound briefly and the Status Light will go out to confirm that the system has
exited Programing Mode.
The pages following explain each of the programmable features in detail, and on pages 32-33 of
this booklet is a convenient feature programming checklist, which greatly simplifies the features
programming process.