![background image](http://html1.mh-extra.com/html/omega/dp461-s/dp461-s_user-manual_4062390034.webp)
5
Setup
5-12
Figure 5-14. Panel Mounting Assembly
6.
Punch or cut a hole in the panel using the panel cutout dimensions in
Figure 5-14
. Remove burrs and paint the panel as required.
7.
Insert the panel-mount gasket around the rear of the case and slide it
forward to the bezel (if it’s not already in place).
8.
Working from the front of the panel, insert the case assembly, rear end
first, all the way into the panel cutout such that the gasket firmly backs
the panel surface.
9.
Working from the rear of the panel, slide the sleeve forward over the
case and up to the panel surface.
The panel should now be sandwiched between the bezel-backed gasket in
front and the sleeve in back.
10. Replace the thumbnuts that secure the sleeve tabs to the case.
REAR
PROTECTIVE
COVER
COVER
MOUNTING
SCREW
THUMBNUTS
SLEEVE
GASKET
CASE
BEZEL
PANEL
METER
0.25 [6.4] MAX
0.03 [0.8] MIN
PANEL THICKNESS
3.622 +0.032/-.000
[92.00 +0.81/-0.00]
1.772 +0.024/-.000
[45.00 +0.61/-0.00]
0.06
[1.5]
4PLCS
R
Содержание DP461-S
Страница 96: ......