PV8344F4E013
4
For Safe Use
The purpose of the unit
This unit is designed to measure the spectroscopic characteristics, such as reflectance
and transmittance. Do not use it for any other purpose.
About this Operation Manual
This Operation Manual contains essential information for the safe and effective use of the
unit. Before use, please read this Operation Manual and the manuals of the devices used
in combination with the unit. Take care to understand the contents and always follow their
instructions.
Safety cannot be ensured when the unit is used in any manner not covered in this
Operation Manual.
Keep this Operation Manual and the manuals of the associated devices in a place where
you can access them easily. If you have any questions on the content of this Operation
Manual, please contact the sales representative where you purchased the unit or the
sales department at Olympus.
NEVER repair or modify the unit
NEVER disassemble or modify the unit except to replace consumables. Otherwise, there
is a risk of injury, damage to equipment, and inability to secure the proper functioning of
the unit. Take measures according to section "6. Troubleshooting" if a repair is
considered necessary. When you cannot fix a problem, send the unit for repair to the
supplier where you purchased it or to the Olympus sales department.
Warnings in this document
This document uses the following symbols and terms in the manner as described below.
These symbols and terms are classified into several safety levels. To use the unit safely
and properly, make sure that you thoroughly understand the contents of the symbols and
terms.
Failure to follow these precautions may result in serious injury or
death.
Failure to follow these precautions may result in injury or material
damage to this Product or peripheral devices.
