Olympus USPM-RU-W Series, Руководство по эксплуатации

Страница: 51 / 166

PV8344F4E013 49
{
Precautions for proper use of the power cord
When no power cord is attached to the product, refer to the
“ Specification ” and
“ Certification cord ” below to choose a proper power cord for the unit.
Specification
Rated Voltage
Rated Current
Rated Temperature
Length
Components 125 V AC (100 – 120 V AC ), 250 V AC (220 – 240 V AC)
6A minimum
60ºC minimum
3.05 m maximum
Grounded inlet plug, with the opposite end formed in compliance with IEC
Table 1. Certification cord
The power cord must be certified by any one of the certification organizations in Table 1, or
be associated with any one of the certification marks shown in Table 1 and/or 2. The
connector must be associated with any one of the certification marks in Table 1. If no cords
certified by any of the certification organizations in Table 1 are available in the country
where you use the product, use a substitute certified by the certification body of the country
or any similar organization.
Country
Certification
organization
Certification
mark
Country
Certification
organization
Certification
mark
Argentina SAA Italy IMQ
Australia SAA Japan JET,JQA,TUV,
UL-APEX/MITI
Austria ÖVE Netherlands KEMA
Belgium CEBEC Norway NEMKO
Canada CSA Spain AEE
Denmark DEMKO Sweden SEMKO
Finland FEI Switzerland SEV
France UTE UK ASTA,BSI
Germany VDE USA UL
Ireland NSAI
We do not guarantee the electrical safety of the product, if an
incorrect power cord is connected to the product.