background image

 

PV8344F4E013  

 

36 

 

Item 

Description 

AUTO 

If enabled, analysis of film thickness is automatically done after the easurement. 

UNIT 

Unit of the film thickness displayed in the analysis. 

USE REFLECTANCE 
OF SUBSTANCE 

Any spectroscopy data file (*.csv/*.dat) is available as reflectance of substance. The first 
data in the data file will be used as the reflectance of substance. Details on reflectance of 
substance will be provided later. 

RANGE 

Wavelength range to be analyzed in the analysis of film thickness. High accuracy can be 
achieved by restricting the range to the wavelength range of high reliance of spectral 
analysis. 

METHOD 

The method of analysis of film thickness. [PV] denotes peak-valley method, [FFT] 
frequency analysis method, and [FIT] curve fit method. For detail on each method, refer to 

6.3 Layer setting

 in the 

UPSM-SA Software Operation Manual

LAYER 

Design parameter of the layer to be analyzed. There is no need to set up if METHOD is 
[PV] and UNIT is [OPTICAL]. Otherwise, it must be properly configured. For details on the 
setting, refer to 

6.3.1 Layer setting

 in the 

UPSM-SA Software Operation Manual

(3) 

Click the THICKNESS button to conduct an analysis of film thickness. 
 

4.13.  Calculation of color difference 

Calculation of color difference is extracted from the values of spectroscopy. 
For detail, refer to 

5.3.1 Calculation of color difference

 in the 

USPM-SA Software 

Operation Manual

(1) Open 

the 

COLOR 

DIFFERENCE window. 

Choose [Analyze]-[Color Difference] on the File menu. The COLOR DIFFERENCE 
window opens. 

 
 
 
 
 
 
 
 
 
 

(2) 

Use the < > buttons to select a DATA NO for the calculation of color difference in 
each pane of DATA1 and DATA2. Color difference is automatically calculated as the 
numbers are defined. 

 

File menu     

Содержание USPM-RU-W Series







































































































































































Отзывы: