50
Unit (μm/mm/inch/mil)
Set the units of the counter data.
Setting items
(1)
(2)
Example
DIP switch
DIP switch setting
DIP switch
DIP switch setting
mm
SW1-1
OFF
SW1-2
OFF
101.6000
μm
ON
101600.0
inch
SW1-1
ON
SW1-2
OFF
4.00000
mil
ON
4000.00
Minimum digit display
Set whether or not to display the minimum digit.
Setting items
DIP switch
DIP switch setting
Example
The minimum digit is displayed.
SW1-3
OFF
101.6000
The minimum digit is not displayed.
ON
101.600
Buzzer
Set whether or not to beep the buzzer to notify the error or the microscope status.
Setting items
DIP switch
DIP switch setting
The buzzer is beeped.
SW1-4
OFF
The buzzer is not beeped.
ON
Restoration of light intensity value and objective magnification at startup
Set whether or not to load the last light intensity value memorized to the microscope with the hand switch STM7-HS or
the focus controller STM7-MCZ when you start the microscope.
Setting items
DIP switch
DIP switch setting
The light intensity value is not loaded. (The initial value of the factory
default is loaded.)
SW1-5
OFF
The light intensity value is loaded
ON
Enable/disable of focus navigator unit
When selecting the illumination you want to control by using the hand switch STM7-HS or the focus controller STM7-
MCZ, set whether or not to allow the focus navigator unit STM7-FN selectable.
Setting items
DIP switch
DIP switch setting
The control of the focus navigator unit LED is disabled.
SW1-6
OFF
The control of the focus navigator unit LED is enabled.
ON
Whether or not to transmit the counter data
Set whether or not to transmit the counter data to other external processing devices when detecting the connection
between the digital indicator STM7-DI and the microscope.
Setting items
DIP switch
DIP switch setting
When the digital indicator is connected, the counter data is not
transmitted to other external processing devices.
When the digital indicator is not connected, the counter data is
transmitted to other external processing devices.
SW1-7
OFF
The counter data is transmitted to other external processing devices.
*1
ON
*1 Regardless of the connection with the digital indicator STM7-DI.
