63
STM7
Fully loosen the clamp f (stud) of the reflected light arm e using
the Allen screwdriver provided with the frame.
Fit the reflected light arm e into the mount dovetail on the frame all the
way until it is stopped. Take care that the reflected light arm is not tilted.
Tighten the clamp f (stud) of the reflected light arm e using the
Allen screwdriver provided with the frame.
Fully loosen the clamping screw h of the round dovetail g (female)
on the reflected light arm e .
Fit the round dovetail on the reflected light illuminator i into the
round dovetail g of the reflected light arm e so that the reflected
light illuminator faces toward the left (i.e. the fiber cable mount comes
on the left).
Tighten the clamping screw h of the reflected light arm e using
the Allen screwdriver provided with the frame.
1
2
3
4
5
6
e
f
g
h
i
6
Mounting the reflected light illuminator
(MM6C-KMAS, MM6C-RLAS)
7
Mounting the focus navigator unit
8
Mounting the autofocus unit
Fully loosen the observation tube clamping screw a using the
Allen screwdriver provided with the frame, attach the circular mount
dovetail on the bottom of the focus navigator unit, and then tighten
the clamping screw again.
Insert the green LED unit (MM6-ILG) b into the LED unit installation
block c of the frame and clamp it with the clamping knob d .
1
2
} The autofocus unit can be mounted only on the motorized frame.
Fully loosen the observation tube clamping screw e using the Allen
screwdriver provided with the frame, attach the circular mount dovetail
on the bottom of the autofocus unit f , and then tighten the clamping
screw again.
1
a
b
c
d
e
f
