Olympus OTV-SI, Инструкция по эксплуатации, Страница: 83 / 174

Chapter 5 Operation
77
VIDEO SYSTEM OTV-SI
9.
If no operation is performed for 3 seconds, the display returns automatically
to the previous menu shown in Figure 5.30.
• For optimum performance, set the chroma level at or near its
midpoint.
• The set chroma level is retained when the video system is
turned OFF and turned ON again.

Color tone level (red/blue) adjustment
The color tone level (red/blue) can be adjusted by navigating through the menu
using the remote control switches or the keyboard (optional).
1.
If the video monitor does not display the menu, press the remote control
switch for execution or for selection, the “F1”, “Enter”, “

”, “

”, “

” or “

”
key on the keyboard to display the menu.
2.
Press the remote control switch for selection, the “

” or “

” key on the
keyboard and select “NEXT” (see Figure 5.6 on page 57).
3.
Press the remote control switch for execution, the “Enter” or “

” key on the
keyboard four times to display the menu bar shown in Figure 5.7 on
page 58.
4.
Press the remote control switch for selection, the “

” or “

” key on the
keyboard and select “CONFG.” (see Figure 5.25 on page 71).
5.
Press the remote control switch for execution, the “Enter” or “

” key on the
keyboard two times to display the menu bar shown in Figure 5.29 on
page 75.
VISY218