Olympus OTV-SI, Инструкция по эксплуатации, Страница: 135 / 174

Chapter 5 Operation
129
VIDEO SYSTEM OTV-SI
5.
Press the remote control switch for execution, the “Enter”, “

” or “

” key
on the keyboard to change between the normal image and the rotated
image.

Using the remote control switch that is assigned to
“ROT[ ]”
1.
Assign the “ROT[ ]” function to one of the remote control switches on the
videoscope or camera head following the instructions given in Section 5.9,
“Remote control switches”.
2.
Press the remote control switch for ROT[ ] to change between the normal
image and the rotated image.
• Normal image is displayed when “ROT [
OFF
]” is displayed.
Rotated image is displayed when “ROT [
ON
]” is displayed.
• When no menu is displayed, pressing the remote control
switch that is set to “ROT[ ]” displays the following at the
bottom left of the video monitor screen.
• The “rotate” setting is retained when the video system is
turned OFF and turned ON again.
ROTATE [
OFF
] : normal image display
ROTATE [
ON
] : rotated image display
VISY218